13. Release Notes

For a list of open issues and known problems, see: https://github.com/radical-cybertools/radical.pilot/issues/

13.1. 1.4.1 Hotfix Release 2020-06-09

  • fix tmpdir mosconfiguration for summit / prrte

13.2. 1.4.0 Release 2020-05-12

  • merge #2122: fixed n_nodes for the case when slots are set
  • merge #2123: fix #2121
  • merge #2124: fixed conda-env path definition
  • merge #2127: bootstrap env fix
  • merge #2133, #2138: IBRun fixes
  • merge #2134: agent stage_in test1
  • merge #2137: agent_0 initialization fix
  • merge #2142: config update
  • add deactivate support for tasks
  • add cancelation example
  • added comet_mpirun to resource_xsede.json
  • added test for launch method “srun”
  • adding cobalt test
  • consistent process counting
  • preliminary FLUX support
  • fix RA utilization in case of no agent nodes
  • fix queue naming, prte tmp dir and process count
  • fix static ve location
  • fixed version discovery (srun)
  • cleanup bootstrap_0.sh
  • separate tacc and xsede resources
  • support for Princeton’s Traverse cluster
  • updated IBRun tests
  • updated LM IBRun

13.3. 1.3.0 Release 2020-04-10

  • task overlay + docs
  • iteration on srun placement
  • add env support to srun
  • theta config
  • clean up launcher termination guard against lower level termination errors
  • cobalt rm
  • optional output stager
  • revive ibrun support
  • switch comet FS

13.4. 1.2.1 Hotfix Release 2020-02-11

  • scattered fixes cfor summit

13.5. 1.2.0 Release 2020-02-11

  • support for bulk callbacks
  • fixed package paths for launch methods (radical.pilot.agent.launch_method)
  • updated documentation references
  • raise minimum Python version to 3.6
  • local submit configuration for Frontera
  • switch frontera to default agent cfg
  • fix cray agent config
  • fix issue #2075 part 2

13.6. 1.1.1 Hotfix Release 2020-02-11

  • fix dependency version for radical.utils

13.7. 1.1 Release 2020-02-11

  • code cleanup

13.8. 1.0.0 Release 2019-12-24

  • transition to Python3
  • migrate Rhea to Slurm
  • ensure PATH setting for sub-agents
  • CUDA is now handled by LM
  • fix / improve documentation
  • Sched optimization: unit lookup in O(1)
  • Stampede2 prun config
  • testing, flaking, linting and travis fixes
  • add pilot.stage_out (symmetric to pilot.stage_in)
  • add noop sleep executor
  • improve prrte support
  • avoid state publish during idle times
  • cheyenne support
  • default to cont scheduler
  • configuration system revamp
  • heartbeat based process management
  • faster termination
  • support for Frontera
  • lockfree scheduler base class
  • switch to RU ZMQ layer

13.9. 0.90.1 Release 2019-10-12

  • port pubsub hotfix

13.10. 0.90.0 Release 2019-10-07

  • transition to Python3

13.11. 0.73.1 Release 2019-10-07

  • Stampede-2 support

13.12. 0.72.2 Hotfix Release 2019-09-30

  • fix sandbox setting on absolute paths

13.13. 0.72.0 Release 2019-09-11

  • implement function executor
  • implement / improve PRTE launch method
  • PRTE profiling support (experimental)
  • agent scheduler optimizations
  • summit related configuration and fixes
  • initial frontera support
  • archive ORTE
  • increase bootstrap timeouts
  • consolidate MPI related launch methods
  • unit testing and linting
  • archive ORTE, issue #1915
  • fix get_mpi_info for Open MPI
  • base classes to raise notimplemented. issue #1920
  • remove outdated resources
  • ensure that pilot env reaches func executor
  • ensureID uniqueness across processes
  • fix inconsistencies in unit sandbox handling
  • fix gpu placement alg
  • fix issue #1910
  • fix torque nodefile name and path
  • add metric definitions in RA support
  • make DB comm bulkier
  • expand resource configs with pilot description keys
  • better tiger support
  • add NOOP scheduler
  • add debug executor

13.14. 0.70.3 Hotfix Release 2019-08-02

  • fix example and summit configuration

13.15. 0.70.2 Hotfix Release 2019-07-31

  • fix static ve creation for Tiger (Princeton)

13.16. 0.70.1 Hotfix Release 2019-07-30

  • fix configuration for Tiger (Princeton)

13.17. 0.70.0 Release 2019-07-07

  • support summitdev, summit @ ORNL (JSRUN, PRTE, RS, ERF, LSF, SMT)
  • support tiger @ princeton (JSRUN)
  • implement NOOP scheduler
  • backport application communicators from v2
  • ensure session close on some tests
  • continous integration: pep8, travis, increasing test coverage
  • fix profile settings for several LMs
  • fix issue #1827
  • fix issue #1790
  • fix issue #1759
  • fix HOMBRE scheduler
  • remove cprof support
  • unify mpirun / mpirun_ccmrun
  • unify mpirun / mpirun_dplace
  • unify mpirun / mpirun_dplace
  • unify mpirun / mpirun_dplace
  • unify mpirun / mpirun_mpt
  • unify mpirun / mpirun_rsh

13.18. 0.63.0 Release 2019-06-25

  • support for summit (experimental, jsrun + ERF)
  • PRRTE support (experimental, summit only)
  • many changes to the test setup (pytest, pylint, flake8, coverage, travis)
  • support for Tiger (adds SRUN launch method)
  • support NOOP scheduler
  • support application level communication
  • support ordered scheduling of tasks
  • partial code cleanup (coding guidelines)
  • simplifying MPI base launch methods
  • support for resource specific SMT settings
  • resource specific ranges of cores/threads can now be blocked from use
  • ORTE support is doscontinued
  • fixes in hombre scheduler
  • improvements on GPU support
  • fix in continuous scheduler which caused underutilization on heterogeneous tasks
  • fixed: #1758, #1764, #1792, #1790, #1827, #187

13.19. 0.62.0 Release 2019-06-08

  • add unit test
  • trigger tests
  • remove obsolete fifo scheduler (use the ordered scheduler instead)
  • add ordered scheduler
  • add tiger support
  • add ssh access to cheyenne
  • cleanup examples
  • fix dplace support
  • support app specified unit sandboxes
  • fix pilot statepush over tunnels
  • fix titan ve creation, add new static ve
  • fix for cheyenne

13.20. 0.61.0 Release 2019-05-07

  • add travis support, test cleanup
  • ensure safe bootstrapper termination on faulty installs
  • push node_list to mongodb for analytics
  • fix default dburl
  • fix imports in tests
  • remove deprecated special case in bootstrapper

13.21. 0.60.1 Hotfix 2019-04-12

  • work around a pip install problem

13.22. 0.60.0 Release 2019-04-10

  • add issue template
  • rename RP_PILOT_SBOX to RP_PILOT_STAGING and expose to tasks
  • fix bridges default partition (#1816)
  • fix #1826
  • fix off-by-one error on unit state check
  • ignore failing DB disconnect
  • follow rename of saga-python to radical.saga

13.23. 0.50.23 Release 2019-03-20

  • hotfix: use popen spawner for localhost

13.24. 0.50.22 Release 2019-02-11

  • another fix LSF var expansion

13.25. 0.50.21 Release 2018-12-19

  • fix LSF var expansion

13.26. 0.50.20 Release 2018-11-25

  • fix Titan OMPI installation
  • support metdata for units
  • fix git error detection during setup

13.27. 0.50.19 Release 2018-11-15

  • ensure profile fetching on empty tarballs

13.28. 0.50.18 Release 2018-11-13

  • support for data locality aware scheduling

13.29. 0.50.17 Release 2018-10-31

  • improve event documentation
  • support CU level metadata

13.30. 0.50.16 Release 2018-10-26

  • add new shell spawner as popen replacement

13.31. 0.50.15 Release 2018-10-24

  • fix recursive pilot staging

13.32. 0.50.14 Release 2018-10-24

  • add Cheyenne support - thanks Vivek!

13.33. 0.50.13 Release 2018-10-16

  • survive if SAGA does not support job.name (#1744)

13.34. 0.50.12 Release 2018-10-12

  • fix stacksize usage on BW

13.35. 0.50.11 Release 2018-10-09

  • fix ‘getting_started’ example (no MPI)

13.36. 0.50.10 Release 2018-09-29

  • ensure the correct code path in SAGA for Blue Waters

13.37. 0.50.9 Release 2018-09-28

  • fix examples
  • fix issue #1715 (#1716)
  • remove Stampede’s resource configs. issue #1711
  • supermic does not like curl -1 (#1723)

13.38. 0.50.8 Release 2018-08-03

  • make sure that CUD values are not None (#1688)
  • don’t limit pymongo version anymore (#1687)

13.39. 0.50.7 Release 2018-08-01

  • fix bwpy handling

13.40. 0.50.6 Release 2018-07-31

  • fix curl tssl negotiation problem (#1683)

13.41. 0.50.5 Release 2018-07-30

  • fix default values for process and thread types (#1681)
  • fix outdated links in ompi deploy script
  • fix/issue 1671 (#1680)
  • fix scheduler config checks (#1677)

13.42. 0.50.4 Release 2018-07-13

  • set oversubscribe default to True

13.43. 0.50.3 Release 2018-07-11

  • disable rcfg expnsion

13.44. 0.50.2 Release 2018-07-08

  • fix relative tarball unpack paths

13.45. 0.50.1 Release 2018-07-05

  • GPU support
  • many bug fixes

13.46. 0.47.14 Release 2018-06-13

  • fix recursive output staging

13.47. 0.47.13 Release 2018-06-02

  • catch up with RU log, rep and prof settings

13.48. 0.47.12 Release 2018-05-19

  • ensure that units are started in their own process group, to ensure clean cancellation semantics.

13.49. 0.47.11 Release 2018-05-08

  • fix schemas on BW (local orte, local aprun)

13.50. 0.47.10 Release 2018-04-19

  • fix #1602

13.51. 0.47.9 Release 2018-04-18

  • fix default scheduler for localhost

13.52. 0.47.8 Release 2018-04-16

  • hotfix to catch up with pypi upgrade

13.53. 0.47.7 Release 2018-04-15

  • bugfix related to radical.entk #255

13.54. 0.47.6 Release 2018-04-12

  • bugfix related to #1590

13.55. 0.47.5 Release 2018-04-12

  • make sure a dict object exists even on empty env settings (#1590)

13.56. 0.47.4 Release 2018-03-20

  • fifo agent scheduler (#1537)
  • hombre agent scheduler (#1536)
  • Fix/issue 1466 (#1544)
  • Fix/issue 1501 (#1541)
  • switch to new OMPI deployment on titan (#1529)
  • add agent configuration doc (#1540)

13.57. 0.47.3 Release 2018-03-20

  • add resource limit test
  • add tmp cheyenne config
  • api rendering proposal for partitions
  • fix bootstrap sequence (BW)
  • tighten bootstrap process, add documentation

13.58. 0.47.2 Release 2018-02-28

  • fix issue 1538
  • fix issue 1554
  • expose profiler to LM hooks (#1522)
  • fix bin names (#1549)
  • fix event docs, add an event for symmetry (#1527)
  • name attribute has been changed to uid, fixes issue #1518
  • make use of flags consistent between RP and RS (#1547)
  • add support for recursive data staging (#1513. #1514) (JD, VB, GC)
  • change staging flags to integers (inherited from RS)
  • add support for bulk data transfer (#1512) (IP, SM)

13.59. 0.47 Release 2017-11-19

  • Correctly added ‘lm_info.cores_per_node’ SLURM
  • Torque RM now respects config settings for cpn
  • Update events.md
  • add SIGUSR2 for clean termination on SGE
  • add information about partial event orders
  • add issue demonstrators
  • add some notes on cpython issue demonstrators
  • add xsede.supermic_orte configuration
  • add xsede.supermic_ortelib configuration
  • apply RU’s managed process to termination stress test
  • attempt to localize aprun units
  • better hops for titan
  • better integration of CU script and app profs
  • catch up with config changes for local testing
  • centralize URL derivation for pilot job service endpoints, hops, and sandboxes
  • clarify use of namespace vs. full qualified URL in the context of RP file staging
  • clean up config management, inheritance
  • don’t fetch json twice
  • ensure that profiles are flushed and packed correctly
  • fail missing pilots on termination
  • fix AGENT_ACTIVE profile timing
  • fix close-session purge mode
  • fix cray agent config, avoid termination race
  • fix duplicated transition events
  • fix osg config
  • fix #1283
  • fixing error from bootstrapper + aprun parsing error
  • force profile flush earlier
  • get cpn for ibrun
  • implement session.list_resources() per #1419
  • make sure a canceled pilot stays canceled
  • make cb return codes consistent
  • make sure profs are flushed on termination
  • make sure the umgr only pulls units its interested in
  • profile mkdir
  • publish resource_details (incl. lm_info) again
  • re-add a profile flag to advance()
  • remove old controllers
  • remove old files
  • remove uid clashes for sub-agent components and components in general
  • setup number of cores per node on stampede2
  • smaller default pilot size for supermic
  • switch to ibrun for comet_ssh
  • track unit drops
  • use js hop for untar
  • using new process class
  • GPU/CPU pinning test is now complete, needs some env settings in the launchers

13.60. 0.46.2 Release 2017-09-02

  • hotfix for #1426 - thanks Iannis!

13.61. 0.46.1 Release 2017-08-23

  • hotfix for #1415

13.62. Version 0.46 2017-08-11

  • TODO

13.63. 0.45.3 Release 2017-05-09

  • Documentation update for the BW tutorial

13.64. 0.45.1 Release 2017-03-05

  • NOTE: OSG and ORTE_LIB on titan are considered unsupported. You can enable
    those resources for experiments by setting the enabled keys in the respective config entries to true.
  • hotfix the configurations markers above

13.65. 0.45 Release 2017-02-28

  • NOTE: OSG and ORTE_LIB on titan are considered unsupported. You can enable
    those resources for experiments by removing the comment markers from the respective resource configs.
  • Adapt to new orte-submit interface.
  • Add orte-cffi dependency to bootstrapper.
  • Agent based staging directives.
  • Fixes to various resource configs
  • Change orte-submit to orterun.
  • Conditional importing of executors. Fixes #926.
  • Config entries for orte lib on Titan.
  • Corrected environment export in executing POPEN
  • Extend virtenv lock timeout, use private rp_installs by default
  • Fix non-mpi execution analogous to #975.
  • Fix/issue 1226 (#1232)
  • Fresh orte installation for bw.
  • support more OSG sites
  • Initial version of ORTE lib interface.
  • Make cprofiling of scheduler conditional.
  • Make list of cprofile subscribers configurable.
  • Move env safekeeping until after the pre bootstrap.
  • Record OSG site name in mongodb.
  • Remove bash’isms from shell script.
  • pylint motivated cleanups
  • Resolving issue #1211.
  • Resource and example config for Shark at LUMC.
  • SGE changes for non-homogeneous nodes.
  • Use ru.which
  • add allegro.json config file for FUB allegro cluster
  • add rsh launch method
  • switch to gsissh on wrangler
  • use new ompi installation on comet (#1228)
  • add a simple/stupid ompi deployment helper
  • updated Config for Stampede and YARN
  • fix state transition to UNSCHEDDULED to avoid repetition and invalid state ordering

13.66. 0.44.1 Release 2016-11-01

  • add an agent config for cray/aprun all on mom node
  • add anaconda config for examples
  • gsissh as default for wrangler, stampede, supermic
  • add conf for spark n wrangler, comet
  • add docs to the cu env inject
  • expose spark’s master url
  • fix CU env setting (stampede)
  • configuration for spark and anaconda
  • resource config entries for titan
  • disable PYTHONHOME setting in titan_aprun
  • dynamic configuration of spark_env
  • fix for gordon config
  • hardcode the netiface version until it is fixed upstream.
  • implement NON_FATAL for staging directives.
  • make resource config available to agent
  • rename scripts
  • update installation.rst
  • analytics backport
  • use profiler from RU
  • when calling a unit state callback, missed states also trigger callbacks

13.67. 0.43.1 Release 2016-09-09

  • hotfix: fix netifaces to version 0.10.4 to avoid trouble on BlueWaters

13.68. 0.43 Release 2016-09-08

  • Add aec_handover for orte.
  • add a local confiuration for bw
  • add early binding eample for osg
  • add greenfield config (only works for single-node runs at the moment)
  • add PYTHONPATH to the vars we reset for CU envs
  • allow overloading of agent config
  • fix #1071
  • fix synapse example
  • avoid profiling of empty state transitions
  • Check of YARN start-all script. Raising Runtime error in case of error.
  • disable hwm altogether
  • drop clones before push
  • enable scheduling time measurements.
  • First commit for multinode YARN cluster
  • fix getip
  • fix iface detection
  • fix reordering of states for some update sequences
  • fix unit cancellation
  • improve ve create script
  • make orte-submit aware of non-mpi CUs
  • move env preservation to an earlier point, to avoid pre-exec stuff
  • Python distribution mandatory to all confs
  • Remove temp agent config directory.
  • Resolving #1107
  • Schedule behind the real unit and support multicore.
  • SchedulerContinuous -> AgentSchedulingComponent.
  • Take ccmrun out of bootstrap_2.
  • Tempfile is not a tempfile so requires explicit removal.
  • resolve #1001
  • Unbreak CCM.
  • use high water mark for ZMQ to avoid message drops on high loads

13.69. 0.42 Release 2016-08-09

  • change examples to use 2 cores on localhost
  • Iterate documentation
  • Manual cherry pick fix for getip.

13.70. 0.41 Release 2016-07-15

  • address some of error messages and type checks
  • add scheduler documentation simplify interpretation of BF oversubscription fix a log message
  • fix logging problem reported by Ming and Vivek
  • global default url, sync profile/logfile/db fetching tools
  • make staging path resilient against cwd changes
  • Switch SSH and ORTE for Comet
  • sync session cleanup tool with rpu
  • update allocation IDs

13.71. 0.40.4 Release 2016-05-18

  • point release with more tutorial configurations

13.72. 0.40.3 Release 2016-05-17

  • point release with tutorial configurations

13.73. 0.40.2 Release 2016-05-13

  • hotfix to fix vnode parsing on archer

13.74. 0.40.1 Release 2016-02-11

  • hotfix which makes sure agents don’t report FAILED on cancel()

13.75. 0.40 Release 2016-02-03

  • Really numberous changes, fixes and features, most prominently: - OSG support - Yarn support - new resource supported - ORTE used for more resources - improved examples, profiling - communication cleanup - large CU support - lrms hook fixes - agent code splitup

13.76. 0.38 Release 2015-12-22

  • fix busy mongodb pull

13.77. 0.37.10 Release 2015-10-20

  • config fix

13.78. 0.37.9 Release 2015-10-20

  • Example fix

13.79. 0.37.8 Release 2015-10-20

  • Allocation fix

13.80. 0.37.7 Release 2015-10-20

  • Allocation fix

13.81. 0.37.6 Release 2015-10-20

  • Documentation

13.82. 0.37.5 Release 2015-10-19

  • timing fix to ensure unit state ordering

13.83. 0.37.3 Release 2015-10-19

  • small fixes, doc changes

13.84. 0.37.2 Release 2015-10-18

  • fix example installation

13.85. 0.37.1 Release 2015-10-18

  • update of documentation and examples
  • some small fixes on shutdown installation

13.86. 0.37 Release 2015-10-15

  • change default spawner to POPEN
  • use hostlist to avoid mpirun* limitations
  • support default callbacks on units and pilots
  • use a config for examples
  • add lrms shutdown hook for ORTE LM
  • various updates to examples and documentation
  • create logfile and profile tarballs on the fly
  • export some RP env vars to units
  • Fix a mongodb race
  • internally unregister pilot cbs on shutdown
  • move agent.stop to finally clause, to correctly react on signals
  • remove RADICAL_DEBUG, use proper logger in queue, pubsub
  • small changes to getting_started
  • add APRUN entry for ARCHER.
  • Updated APRUN config for ARCHER. Thanks Vivek!
  • Use designated termination procedure for ORTE.
  • Use statically compiled and linked OMPI/ORTE.
  • Wait for its component children on termination
  • make localhost (ForkLRMS) behave like a resource with an inifnite number of cores

13.87. 0.36 Release 2015-10-08

(the release notes also cover some changes from 0.34 to 0.35)

  • simplify agent process tree, process naming
  • improve session and agent termination
  • several fixes and chages to the unit state model (refer to documentation!)
  • fix POPEN state reporting
  • split agent component into individual, relocatable processes
  • improve and generalize agent bootstrapping
  • add support for dynamic agent layout over compute nodes
  • support for ORTE launch method on CRAY (and others)
  • add a watcher thread for the ORTE DVM
  • improves profiling support, expand to RP module
  • add various profiling analysis tools
  • add support for profile fetching from remote pilot sandbox
  • synchronize and recombine profiles from different pilots
  • add a simple tool to run a recorded session.
  • add several utility classes: component, queue, pubsub
  • clean configuration passing from module to agent.
  • clean tunneling support
  • support different data frame formats for profiling
  • use agent infrastructure (LRMS, LM) for spawning sub-agents
  • allow LM to specify env vars to be unset.
  • allow agent on mom node to use tunnel.
  • fix logging to avoid log leakage from lower layers
  • avoid some file system bottlenecks
  • several resource specific configuration fixes (mostly stampede, archer, bw)
  • backport stdout/stderr/log retrieval
  • better logging of clone/drops, better error handling for configs
  • fix, improve profiling of CU execution
  • make profile an object
  • use ZMQ pubsub and queues for agent/sub-agent communication
  • decouple launch methods from scheduler for most LMs NOTE: RUNJOB remains coupled!
  • detect disappearing orte-dvm when exit code is zero
  • perform node allocation for sub-agents
  • introduce a barrier on agent startup
  • fix some errors on shell spanwer (quoting, monotoring delays)
  • make localhost layout configurable via cpn
  • make setup.py report a decent error when being used with python3
  • support nodename lookup on Cray
  • only mkdir in input staging controller when we intent to stage data
  • protect agent cb invokation by lock
  • (re)add command line for profile fetching
  • cleanup of data staging, with better support for different schemas (incl. GlobusOnline)
  • work toward better OSG support
  • Use netifaces for ip address mangling.
  • Use ORTE from the 2.x branch.
  • remove Url class

13.88. 0.35.1 Release 2015-09-29

  • hotfix to use popen on localhost

13.89. 0.35 Release 2015-07-14

  • numerous bug fixes and support for new resources

13.90. 0.34 Release 2015-07-14

  • Hotfix release for an installation issue

13.91. 0.33 Release 2015-05-27

  • Hotfix release for off-by-one error (#621)

13.92. 0.32 Release 2015-05-18

  • Hotfix release for MPIRUN_RSH on Stampede (#572).

13.93. 0.31 Release 2015-04-30

  • version bump to trigger pypi release update

13.94. 0.30 Release 2015-04-29

  • hotfix to handle broken pip/bash combo on archer

13.95. 0.29 Release 2015-04-28

  • hotfix to handle stale ve locks

13.96. 0.28 Release 2015-04-16

  • This release contains a very large set of commits, and covers a fundamental overhaul of the RP agent (amongst others). It also includes: - support for agent profiling - removes a number of state race conditions - support for new backends (ORTE, CCM) - fixes for other backends - revamp of the integration tests

13.97. 0.26 Release 2015-04-08

  • hotfix to cope with API changing pymongo release

13.98. 0.25 Release 2015-04-01

  • hotfix for a stampede configuration change

13.99. 0.24 Release 2015-03-30

  • More support for URLs in StagingDirectives (#489).
  • Create parent directories of staged files.
  • Only process entries for Output FTW, fixes #490.
  • SuperMUC config change.
  • switch from bson to json for session dumps
  • fixes #451
  • update resources.rst
  • remove superfluous n
  • fix #438
  • add documentation on resource config changes, closes #421
  • .ssh/authorized_keys2 is deprecated since 2011
  • improved intra-node SSH FAQ item

13.100. 0.23 Release 2014-12-13

  • fix #455

13.101. 0.22 Release 2014-12-11

  • several state races fixed
  • fix to tools for session cleanup and purging
  • partial fix for pilot cancelation
  • improved shutdown behavior
  • improved hopper support
  • adapt plotting to changed slothistory format
  • make instructions clearer on data staging examples
  • addresses issue #216
  • be more resilient on pilot shutdown
  • take care of cancelling of active pilots
  • fix logic error on state check for pilot cancellation
  • fix blacklight config (#360)
  • attempt to cancel pilots timely…
  • as fallback, use PPN information provided by SAGA
  • hopper usues torque (thanks Mark!)
  • Re-fix blacklight config. Addresses #359 (again).
  • allow to pass application data to callbacks
  • threads should not be daemons…
  • workaround on failing bson encoding…
  • report pilot id on cu inspection
  • ignore caching errors
  • also use staging flags on input staging
  • stampede environment fix
  • Added missing stampede alias
  • adds timestamps to unit and pilot logentries
  • fix state tags for plots
  • fix plot style for waitq
  • introduce UNSCHEDULED state as per #233
  • selectable terminal type for plot
  • document pilot log env
  • add faq about VE problems on setuptools upgrade
  • allow to specify session cache files
  • added configuration for BlueBiou (Thanks Jordane)
  • better support for json/bson/timestamp handling; cache mongodb data for stats, plots etc
  • localize numpy dependency
  • retire input_data and output_data
  • remove obsolete staging examples
  • address #410
  • fix another subtle state race

13.102. 0.21 Release 2014-10-29

  • Documentation of MPI support
  • Documentation of data staging operations
  • correct handling of data transfer exceptions
  • fix handling of non-ascii data in unit stdio
  • simplify switching of access schemas on pilot submission
  • disable pilot virtualenv for unit execution
  • MPI support for DaVinci
  • performance optimizations on file transfers, unit sandbox setup
  • fix ibrun tmp file problem on stampede

13.103. 0.19 Release September 12. 2014

13.104. 0.18 Release July 22. 2014

13.105. 0.17 Release June 18. 2014

Bugfix release - fixed file permissions et al. :/

13.106. 0.16 Release June 17. 2014

Bugfix release - fixed file permissions et al.

13.107. 0.15 Release June 12. 2014

Bugfix release - fixed distribution MANIFEST:

https://github.com/radical-cybertools/radical.pilot/issues/174

13.108. 0.14 Release June 11. 2014

Closed Tickets:

New Features

  • Experimental pilot-agent for Cray systems
  • New multi-core agent with MPI support
  • New ResourceConfig mechanism does not reuquire the user to add resource configurations explicitly. Resources can be configured programatically on API-level.

API Changes:

  • ComputeUnitDescription.working_dir_priv removed
  • Extended state model
  • resource_configurations parameter removed from PilotManager c`tor

13.109. 0.13 Release May 19. 2014

  • ExTASY demo release
  • Support for project / allocation
  • Updated / simplified resource files
  • Refactored bootstrap mechnism

13.110. 0.12 Release May 09. 2014

13.111. 0.11 Release Apr. 29. 2014

  • Fixes error in state history reporting

13.112. 0.10 Release Apr. 29. 2014

13.113. 0.9 Release Apr. 16. 2014

13.114. 0.8 Release Mar. 24. 2014

13.115. 0.7 Release Feb. 25. 2014

13.116. 0.6 Release Feb. 24. 2014

  • BROKEN RELEASE

13.117. 0.5 Release Feb. 06. 2014

13.118. 0.4 Release

  • Tutorial 1 release (Github only)
  • Consistent naming (sagapilot instead of sinon)

13.119. 0.1.3 Release

13.120. 0.1.2 Release