List of Pre-Configured Resources

RESOURCE_PRINCETON

TIGER_CPU

  • Resource label : princeton.tiger_cpu
  • Raw config : resource_princeton.json
  • Note :
  • Default values for ComputePilotDescription attributes:
  • queue         :cpu
  • sandbox       :/scratch/gpfs/$USER/
  • access_schema :local
  • Available schemas : local, ssh

TIGER_GPU

  • Resource label : princeton.tiger_gpu
  • Raw config : resource_princeton.json
  • Note :
  • Default values for ComputePilotDescription attributes:
  • queue         :gpu
  • sandbox       :/scratch/gpfs/$USER/
  • access_schema :local
  • Available schemas : local, ssh

RESOURCE_FUB

ALLEGRO_RSH

The FU Berlin ‘Allegro’ cluster at IMP (http://www.allegro.imp.fu-berlin.de).

  • Resource label : fub.allegro_rsh
  • Raw config : resource_fub.json
  • Note : This one uses experimental RSH support to execute tasks.
  • Default values for ComputePilotDescription attributes:
  • queue         :micro
  • sandbox       :$HOME/NO_BACKUP
  • access_schema :ssh
  • Available schemas : ssh

RESOURCE_OSG

XSEDE-VIRT-CLUST

XSEDE OSG Virtual Cluster is a Condor pool overlay on top of OSG resources. (https://portal.xsede.org/OSG-User-Guide).

  • Resource label : osg.xsede-virt-clust
  • Raw config : resource_osg.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, gsissh

CONNECT

OSG Connect. (https://osgconnect.net).

  • Resource label : osg.connect
  • Raw config : resource_osg.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, gsissh

RESOURCE_ORNL

RHEA_APRUN

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/titan/)

  • Resource label : ornl.rhea_aprun
  • Raw config : resource_ornl.json
  • Note : Requires the use of an RSA SecurID on every connection.
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$MEMBERWORK/`groups | cut -d' ' -f2`
  • access_schema :local
  • Available schemas : local, ssh, go

RHEA_SSH

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/rhea/)

  • Resource label : ornl.rhea_ssh
  • Raw config : resource_ornl.json
  • Note : Requires the use of an RSA SecurID on every connection.
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$MEMBERWORK/`groups | cut -d' ' -f2`
  • access_schema :local
  • Available schemas : local, ssh, go

SUMMITDEV

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/titan/)

  • Resource label : ornl.summitdev
  • Raw config : resource_ornl.json
  • Note : Requires the use of an RSA SecurID on every connection.
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local

SUMMIT

ORNL’s summit, a Cray XK7

  • Resource label : ornl.summit
  • Raw config : resource_ornl.json
  • Note : None
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$MEMBERWORK/%(pd.project)s
  • access_schema :local
  • Available schemas : local

SUMMIT_PRTE

ORNL’s summit, a Cray XK7

  • Resource label : ornl.summit_prte
  • Raw config : resource_ornl.json
  • Note : None
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$MEMBERWORK/%(pd.project)s
  • access_schema :local
  • Available schemas : local

RESOURCE_NCAR

CHEYENNE

An SGI ICE XA Cluster located at the National Center for Atmospheric Research (NCAR), (https://www2.cisl.ucar.edu/resources/computational-systems/cheyenne)

  • Resource label : ncar.cheyenne
  • Raw config : resource_ncar.json
  • Note : Requires the use of a token from an USB on every connection.
  • Default values for ComputePilotDescription attributes:
  • queue         :regular
  • sandbox       :$TMPDIR
  • access_schema :local
  • Available schemas : local, ssh

RESOURCE_LOCAL

LOCALHOST

Your local machine.

  • Resource label : local.localhost
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_APRUN

Your local machine.

  • Resource label : local.localhost_aprun
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_YARN

Your local machine.

  • Resource label : local.localhost_yarn
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_ANACONDA

Your local machine.

  • Resource label : local.localhost_anaconda
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_SPARK

Your local machine gets spark.

  • Resource label : local.localhost_spark
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_SPARK_ANACONDA

Your local machine gets spark.

  • Resource label : local.localhost_spark_anaconda
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_ORTE

Your local machine.

  • Resource label : local.localhost_orte
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_PRTE

Your local machine.

  • Resource label : local.localhost_prte
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_ORTELIB

Your local machine.

  • Resource label : local.localhost_ortelib
  • Raw config : resource_local.json
  • Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

LOCALHOST_FUNCS

  • Resource label : local.localhost_funcs
  • Raw config : resource_local.json
  • Note :
  • Default values for ComputePilotDescription attributes:
  • queue         :None
  • sandbox       :$HOME
  • access_schema :local
  • Available schemas : local, ssh

RESOURCE_RADICAL

TUTORIAL

Our private tutorial VM on EC2

  • Resource label : radical.tutorial
  • Raw config : resource_radical.json
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, local

ONE

radical server 1

  • Resource label : radical.one
  • Raw config : resource_radical.json
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, local

TWO

radical server 2

  • Resource label : radical.two
  • Raw config : resource_radical.json
  • Default values for ComputePilotDescription attributes:
  • queue         :batch
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, local

RESOURCE_XSEDE

WRANGLER_SSH

The XSEDE ‘Wrangler’ cluster at TACC (https://www.tacc.utexas.edu/wrangler/).

  • Resource label : xsede.wrangler_ssh
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :normal
  • sandbox       :$WORK
  • access_schema :gsissh
  • Available schemas : gsissh, ssh, go

WRANGLER_YARN

The XSEDE ‘Wrangler’ cluster at TACC (https://www.tacc.utexas.edu/wrangler/).

  • Resource label : xsede.wrangler_yarn
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :hadoop
  • sandbox       :$WORK
  • access_schema :gsissh
  • Available schemas : gsissh, ssh, go

WRANGLER_SPARK

The XSEDE ‘Wrangler’ cluster at TACC (https://www.tacc.utexas.edu/wrangler/).

  • Resource label : xsede.wrangler_spark
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :normal
  • sandbox       :$WORK
  • access_schema :gsissh
  • Available schemas : gsissh, ssh, go

FRONTERA

  • Resource label : xsede.frontera
  • Raw config : resource_xsede.json
  • Note :
  • Default values for ComputePilotDescription attributes:
  • queue         :normal
  • sandbox       :$SCRATCH
  • access_schema :gsissh
  • Available schemas : gsissh, ssh, local

STAMPEDE2_SSH

The XSEDE ‘Stampede’ cluster at TACC (https://www.tacc.utexas.edu/stampede/).

  • Resource label : xsede.stampede2_ssh
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :normal
  • sandbox       :$WORK
  • access_schema :gsissh
  • Available schemas : gsissh, ssh

STAMPEDE2_SRUN

The XSEDE ‘Stampede’ cluster at TACC (https://www.tacc.utexas.edu/stampede/).

  • Resource label : xsede.stampede2_srun
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :normal
  • sandbox       :$WORK
  • access_schema :gsissh
  • Available schemas : gsissh, ssh

COMET_SSH

The Comet HPC resource at SDSC ‘HPC for the 99%%’ (http://www.sdsc.edu/services/hpc/hpc_systems.html#comet).

  • Resource label : xsede.comet_ssh
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :compute
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, gsissh

COMET_SSH_FUNCS

The Comet HPC resource at SDSC ‘HPC for the 99%%’ (http://www.sdsc.edu/services/hpc/hpc_systems.html#comet).

  • Resource label : xsede.comet_ssh_funcs
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :compute
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, gsissh

COMET_SPARK

The Comet HPC resource at SDSC ‘HPC for the 99%%’ (http://www.sdsc.edu/services/hpc/hpc_systems.html#comet).

  • Resource label : xsede.comet_spark
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
  • Default values for ComputePilotDescription attributes:
  • queue         :compute
  • sandbox       :$HOME
  • access_schema :ssh
  • Available schemas : ssh, gsissh

SUPERMIC_SSH

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

  • Resource label : xsede.supermic_ssh
  • Raw config : resource_xsede.json
  • Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
  • Default values for ComputePilotDescription attributes:
  • queue         :workq
  • sandbox       :/work/$USER
  • access_schema :gsissh
  • Available schemas : gsissh, ssh

SUPERMIC_ORTE

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

  • Resource label : xsede.supermic_orte
  • Raw config : resource_xsede.json
  • Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
  • Default values for ComputePilotDescription attributes:
  • queue         :workq
  • sandbox       :/work/$USER
  • access_schema :local
  • Available schemas : local, gsissh, ssh

SUPERMIC_ORTELIB

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

  • Resource label : xsede.supermic_ortelib
  • Raw config : resource_xsede.json
  • Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
  • Default values for ComputePilotDescription attributes:
  • queue         :workq
  • sandbox       :/work/$USER
  • access_schema :gsissh
  • Available schemas : gsissh, ssh

BRIDGES

The XSEDE ‘Bridges’ cluster at PSC (https://portal.xsede.org/psc-bridges/).

  • Resource label : xsede.bridges
  • Raw config : resource_xsede.json
  • Note : Always set the project attribute in the ComputePilotDescription.
  • Default values for ComputePilotDescription attributes:
  • queue         :RM
  • sandbox       :$SCRATCH
  • access_schema :gsissh
  • Available schemas : gsissh, ssh, go

SUPERMIC_SPARK

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

  • Resource label : xsede.supermic_spark
  • Raw config : resource_xsede.json
  • Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
  • Default values for ComputePilotDescription attributes:
  • queue         :workq
  • sandbox       :/work/$USER
  • access_schema :gsissh
  • Available schemas : gsissh, ssh

RESOURCE_DEBUG

LOCAL

  • Resource label : debug.local
  • Raw config : resource_debug.json
  • Note :
  • Default values for ComputePilotDescription attributes:
  • queue         :
  • sandbox       :$HOME/
  • access_schema :local
  • Available schemas : local

SUMMIT

  • Resource label : debug.summit
  • Raw config : resource_debug.json
  • Note :
  • Default values for ComputePilotDescription attributes:
  • queue         :
  • sandbox       :$HOME/
  • access_schema :local
  • Available schemas : local